Thomson軸支撐塊
軸支撐臺用于末端或斷續支撐，要求負載較輕和輕微軸變形（影響不大）。 與軸支撐導軌不同，軸臺不允許開型滾珠襯套軸承縱向通過。 軸支撐臺可以夾緊軸、SB型，并且消除不需用來保持軸位置的螺栓。 高精度應用中為減少表面或底座支撐間的加工容差，我們推薦使用加墊片。
Thomson Linear Motion Optmized
軸支撐塊規格
| 支撐臺類型 | 英制類型(in) | 公制類型(mm) |
|---|---|---|
| 尺寸 | .25至2英寸 | 8至40mm |
| 支撐類型 | 標準 低型 法蘭型 |
標準型 低型 |
| 支撐材料 | 鋁 可鍛鑄鐵 |
鋁 可鍛鑄鐵 |
軸支撐塊特點：
- SB型軸支撐臺可以夾緊軸，不需用螺栓等來保持軸的位置。
- ASB型軸臺，采用高強度擠壓鋁制造，提供負載設計在基礎一邊的regerence邊緣應用的末端或斷續支撐。
- FSB法蘭支撐臺提供無需專用接頭托架的垂直安裝。
60 Case® LinearRace® Shafting: Fully Stocked to Keep Your Design Projects on Track
Thomson 60 Case Linear Race shafting has been popular for decades for its consistent reliability and performance. To help customers get this high-quality, lab-tested product into their hands as quickly as possible for their time-sensitive design projects, Thomson goes to great lengths.
Shafting Selector Tool: Special Machining Online Demo
With the special machining add-on to the Thomson online shafting selector tool, the burden of creating 2D drawings is relieved, and the amount of time needed to specify the machined shaft is dramatically reduced.
Watch this comprehensive demo and see how this feature offers the most commonly used machining options, which are automatically converted to manufacturable 2D drawings for download as printable PDFs or sharable links.
Try the online shafting selector tool and special machining add-on at: https://www.thomsonlinear.com/en/products/shafting
For any cases in which your machining configurations don't fall within the scope of our tool's options, Thomson application engineers are always ready to provide fast help.
