RediMount? 電機安裝系統
借助于RediMount?電機安裝系統，Thomson Micron? True Planetary減速機幾乎可以簡單、快速、無誤連接到市場上的所有電機上。 緊定套和外殼等創新設計，使減速機的安裝可一步完成。
?
?
- 自對準中心 - 保持電機軸和減速機的同心性
- 預安裝小齒輪- 不再需要小齒輪設定
- 模塊化設計 - 減速機和外殼可單獨訂購
- 靈活性 - 可方便地進行備用電機更換
- 可替換性- 7個產品系列使用同樣的RediMount系統
Thomson Linear Motion Optmized
聯系我們，獲得免費資源！
聯系我們，獲得免費資源！
Thomson 精密梯形絲杠
Thomson 精密梯形絲杠
全球最全面的執行器選擇方案
Thomson 直線運動系統
Choose Your Login Account
Thomson currently has two account systems - one for the website and CAD model downloads, and one for e-commerce. We understand that two logins is an inconvenience and are working to consolidate our systems into one login process. Until we’re able to consolidate the two logins, please follow these guidelines:
Website Login
- Download CAD models
- Save and retrieve projects in LinearMotioneering® and MicronMotioneering® tools
- Access Distributor Extranet and all related resources
E-commerce Login
- Order directly from Thomson online (North America only)
- Authorized Thomson Distributors can view and order from quotes online (Global)
- View the shopping cart and look up prior direct orders
產品介紹
RediMount? 安裝指南
- ?將袖套滑入輪轂，然后將襯套的槽與輪轂的槽對準。
- 將電機置于工作表面或握緊固件上，使輸出軸朝上。 如果電機帶有一個鍵，取下鍵并將鍵槽與輪轂的槽對準。 將減速機滑動到電機軸上。
- ?旋轉輪轂，將輸入外殼的接入孔與輪轂夾緊螺栓對準。
- ?使用扭力扳手將輪轂螺栓上緊（扭矩值如表中所示）。
- ?用提供的螺栓固定電機和減速機。
- 分三步將輪轂螺栓逐步上緊，每次將扭矩增大一些，直至它最后達到表中所示上緊扭矩。
技術規格：
| 輪轂螺栓上緊扭矩 | |||||
|---|---|---|---|---|---|
| 減速機型號 | 減速機機架尺寸 | 預緊扭矩 | 最終上緊扭矩 | ||
| in-lb | Nm | in-lb | Nm | ||
| XTRUEâ?¢ | 40 | 0.5 | 0.05 | 9.6 | 1.09 |
| 60 | 2 | 0.2 | 39 | 4.4 | |
| 80 | 4 | 0.4 | 76 | 8.5 | |
| 120 | 16 | 1.8 | 316 | 36.0 | |
| 160 | 32 | 3.6 | 636 | 72.0 | |
| NemaTRUE? NemaTRUE 90? |
23/60 | 2 | 0.2 | 39 | 4.4 |
| 34/90 | 4 | 0.4 | 76 | 8.5 | |
| 42/115 | 16 | 1.8 | 316 | 36.0 | |
| DuraTRUE? DuraTRUE 90? |
60 | 2 | 0.2 | 39 | 4.4 |
| 90 | 4 | 0.4 | 76 | 8.5 | |
| 115 | 16 | 1.8 | 316 | 36.0 | |
| 142 | 32 | 3.6 | 636 | 72.0 | |
| UltraTRUE? UltraTRUE 90? ValueTRUE? ValueTRUE 90? EverTRUE? |
60 | 2 | 0.2 | 39 | 4.4 |
| 75/90 | 4 | 0.4 | 76 | 8.5 | |
| 100/115 | 16 | 1.8 | 316 | 36.0 | |
| 140 | 32 | 3.6 | 636 | 72.0 | |
| 180 | 55 | 6.3 | 1104 | 125.0 | |
產品選型
Not finding the right gearhead for your needs? Visit Micron Motioneering, our full-featured sizing tool!
Family
Backlash
Peak Torque
Nm — Nm
ft-lb — ft-lb
Angle
Frame Size
Slim Line
Ratio
Gearing
Duty Cycle
Output Shaft: Single, Dual or Hollow
Redimount
Select other checkboxes to view available options
比較
3D 模型
Family
- ValueTRUE (VT) - Helical Crowned Gearing
- UltraTRUE (UT) - Helical Crowned Gearing
- XTRUE (XT) - Spur Gearing
- DuraTRUE (DT) - Spur Gearing
- EverTRUE (ET) - Continuous Duty, Spur Gearing
- AquaTRUE (AQT) - Stainless Steel Construction, IP66, IP67 and IP69K Protection. Perfect for washdown applications, Spur Gearing.
Frame Size
Roughly the width of the gear head.
Ratio
Input speed vs. output speed
Output Shaft: Single, Dual or Hollow
- Single - One solid output shaft
- Dual - Two solid output shafts. Only available on right angle units
- Hollow - Gearbox has a through bore for clamping onto a shaft. Only available on right angle units.
Angle
- Inline - Motor and output shaft will be in-line with each other
- Right Angle - Motor will be at a 90 degree angle from the output
Backlash
Backlash, sometimes called lash or play, is lost motion caused by space between the gear teeth.
Gearing
Helical gears are known for their quiet and smooth operation along with their ability to transmit higher loads than spur gears.
Peak Torque
Allowable momentary peak torque for emergency stop or heavy shock loading.
Duty Cycle
Continuous Duty - Able to run non-stop
Redimount
The RediMount is the adapter that goes between the Motor and the Gearhead. Different RediMount numbers have different dimensions. If you need assistance in selecting a RediMount to fit your motor contact customer support or visit Micromotioneering for assistance.
All Micron gearheads use the innovative RediMount? system, the most flexible mounting system available today. This mounting system allows easy and error free mounting to any motor on the market in just three easy steps - simply align, mount and tighten.
Slim Line
More compact version.
To provide better service to you on our websites, we and our service providers use cookies to collect your personal data when you browse. For information about our use of cookies and how to decline them or turn them off please read our cookie policy [available here].